August 30, 2019

Ian and I have started the WISRD podcast this year. For our first podcast, our first guest will be fellow WISRD member Reid Allenstein. The materials that we are using for the WISRD podcast are the mics that we are borrowing from tech.

October 21, 2019

Today I have started test 2 of replacing the straws with a 3 d printed model for laminar flow. I used the caliper and on shape to make the model shown above. The measurements of the model are 80x82x25 for cura. The holes shown above are 10×10 extruded by 2.5 inches.

August 23, 2021